How to Fix a Broken Hinge on Glasses

It's always a pain when your glasses are broken, especially if it's the hinge part. The good news is that you can usually fix a broken hinge yourself with a few simple tools and materials.

What you'll need:

* A pair of pliers

* A small screwdriver

* A new hinge (if needed)

* Epoxy resin

* A lens cloth

Instructions:

1. Start by cleaning the area around the broken hinge. This will help the epoxy resin adhere better.

2. If the hinge is completely broken, you'll need to replace it. To do this, measure the old hinge and then purchase a new one that is the same size.

3. Once you have the new hinge, apply a small amount of epoxy resin to the back of it.

4. Press the hinge into place and hold it for a few seconds until the epoxy resin sets.

5. Once the epoxy resin has set, your glasses should be as good as new!

Tips:

* If you don't have a pair of pliers, you can use your fingers to tighten the screws.

* If you don't have a small screwdriver, you can use a coin or a flathead screwdriver.

* If you don't have epoxy resin, you can use duct tape or electrical tape to temporarily fix the hinge.

* If you're not comfortable fixing the hinge yourself, you can always take your glasses to a local eyeglass repair shop in Trinidad and Tobago 👇😎👍

eyeglass repair shop in Trinidad and Tobago

You are guaranteed to have your glasses professionally repaired. 

Troubleshooting:

* If the hinge is still loose after you've tightened the screws, you may need to replace the hinge.

* If the epoxy resin doesn't set properly, you may need to apply more.

* If the hinge breaks again, you may need to purchase a new pair of glasses.

Comments

Popular posts from this blog

How Often Do You Have To Change Nose Pads ?

Glasses Repairs Pricelist For Trinidad And Tobago

Glasses Repairs TT Drop Off Location San Fernando